1. Textile Directory
  2. Blog
  3. Textile Guide
  4. Tech Pack Guide: What to Send an Indian Garment…
Textile Guide

Tech Pack Guide: What to Send an Indian Garment Factory for Your First Order

  • By BizTorq Directory Team
  • 4 min read
Tech Pack Guide: What to Send an Indian Garment Factory for Your First Order

Quick answer

A tech pack is a short document with your sketch, measurements per size, fabric, trims, stitching, colours, labels and packaging. It is the clearest way to get the first sample right. If you do not have one, a sketch plus reference photos or a garment you like is enough to start, and a good factory can help you build the rest. Always approve a sample in writing before bulk.

The most common reason a first sample goes wrong is not a bad factory. It is a brief that left too much to guess. A tech pack fixes that. This guide explains what to include, what to do if you are not ready to write a full one, and how to review a sample.

For the whole process, see our make-to-order guide. To see how a brief fits into the order, visit how make-to-order works.

What a tech pack contains

  1. Cover page: style name or number, season, product type, sizes, colours.
  2. Flat sketches: front, back and side, with details called out. Hand drawings are fine if they are clear.
  3. Measurements (spec sheet): every point of measure for every size, with tolerance. State whether measurements are before or after wash.
  4. Fabric: type, composition, weight, colour reference (Pantone if possible), and a swatch or photo.
  5. Trims: buttons, zips, thread, elastic, labels, and where each goes.
  6. Construction: stitch types, seam finishes, hem details, pocket placement.
  7. Print and embroidery: artwork files, placement, size, colours.
  8. Labels and packaging: label position, care label text, hang tags, polybag, carton marks.

If you do not have a tech pack yet

Many first-time buyers do not. You can still start. Send:

  • A clear sketch or photos of a reference garment from front, back and details.
  • The measurements of a garment you like in your base size.
  • Your size range and a rough size chart.
  • Fabric preference, or the look and feel you want.
  • Any labels or details you must have.

A good factory will ask questions and may make a tech pack for you, sometimes for a small fee. Ask whether it is included in the sample cost.

How to measure and grade

Choose a base size, measure a garment that fits well, and list the key points: chest, waist, hip, length, shoulder, sleeve length, inseam, rise, leg opening. Then say how each point changes from size to size (the grade). Give the same set of points for every size. If you are not sure, ask the factory for their standard grade and then adjust.

Reviewing the sample

  • Measure against your spec sheet, flat, in several places.
  • Wash it, then measure again.
  • Check fabric, colour and hand feel against your reference.
  • Check stitching, seam finish, buttons, zips and labels.
  • Try it on a model in your base size.
  • Send corrections in writing, with photos, point by point.

Expect one or two rounds. A second sample adds about the same time as the first, plus courier, so account for it in your timeline with our planner.

Protecting your design

Ask for an NDA before you share original artwork, especially for exclusive prints. Many factories will sign one. Keep original files, and share reference images rather than editable files when you can. Also see our private-label brand guide.

Ready to brief a factory?

Send what you have through our brief form. If you are not sure where to start, begin with a top, dress or pair of jeans and we will help you fill the gaps.

Frequently asked questions

What is a tech pack?

A document that tells a factory exactly how to make a garment: sketches, measurements, fabric, trims, stitching, colours, labels and packaging.

Do I need a tech pack for my first order?

No. A sketch plus reference photos or a garment you like is enough to start. A tech pack makes the first sample more accurate.

Who makes the tech pack?

You can write it yourself, hire a freelance technical designer, or ask the factory to prepare one, sometimes for a fee.

What measurements do I need?

Key points such as chest, waist, hip, length, shoulder, sleeve length, inseam, rise and leg opening, for every size, with tolerance.

What is grading?

Grading is how each measurement changes from one size to the next. Give the grade or ask the factory for its standard grade and adjust.

What is a Pantone reference?

A standard colour code that helps the factory match a colour. A physical swatch is even better, because screens differ.

How many samples will I need?

Often one or two. A second sample adds about the same time again, plus courier.

Should I measure before or after wash?

State which in your spec sheet. Fabrics change size in a wash, so test a washed sample.

How do I protect my design?

Ask for an NDA before sharing original artwork, keep your source files, and share reference images where you can.

Can I send a physical garment as a reference?

Yes. A garment you like with its measurements is one of the best references. Courier it to the factory.

What if the sample does not match my brief?

Send corrections in writing with photos, point by point. Reputable factories will adjust and make another sample.

Do labels need to be in the tech pack?

Yes. Include label position, care label text and packaging so the factory can quote and prepare them.

Last updated 14 November 2026
WhatsApp Us