Foil Printing, Brasso (Burn-Out), Flock & Special Finishes Quiz: Value Addition

How are translucent patterns created in a "Brasso" saree? Why does cheap foil print peel off in the wash? Test your technical knowledge of Surat and Jaipur value-addition processes.

  • 10 questions
  • About 5 minutes
  • Intermediate
Question 1How is "Brasso" (internationally known as Devoré or Burn-Out) fabric created in textile process houses?
Question 2In metallic "Foil Printing" on kurtis and sarees, what holds the shiny metallic foil onto the fabric surface?
Question 3What is the most common reason why metallic foil print on a budget kurti peels or dulls after the very first home wash?
Question 4How does "Electrostatic Flock Printing" create a raised, velvety suede-like motif on plain fabric?
Question 5In Indian textile printing parlance, what does "Khadi Print" (or Khadi Pigment Print) mean—not to be confused with handspun Khadi cloth?
Question 6Why can permanent "Accordion Pleats" or "Plissé" be heat-set into polyester satin or georgette, whereas 100% pure cotton pleats flatten out when washed?
Question 7What is "Rubber Print" (or Plastisol / High-Density Khadi Print) commonly used for on T-shirts and casual kurtis?
Question 8What is "Embossing" in textile finishing?
Question 9How should a customer wash and iron a "Foil-Printed" or "Flock-Printed" kurti to make the surface work last?
Question 10Under Indian GST rules, if a registered saree trader sends their own dyed georgette fabric to a printing unit for Foil Printing or Brasso work, what GST rate applies on the job-work invoice?

Study notes

Surface Value Addition: Turning Dyed Cloth into Festive Fashion

In processing hubs like Surat (Pandesara/Sachin), Ahmedabad (Narol), and Jaipur (Sanganer), specialised surface printing and chemical etching turn plain dyed fabrics into high-margin partywear sarees, kurtis, and western dresses.

Key Value-Addition Techniques

  • Metallic Foil Printing: A pattern is screen-printed onto fabric using a heat-activated thermoplastic adhesive paste (foil binder). Metallic polyester transfer foil is then pressed onto the sticky pattern under heated calender/flatbed rollers (150°C–170°C). Wash fastness depends entirely on binder quality and proper curing temperature.
  • Brasso / Burn-Out (Devoré): Performed on a blended fabric woven from two different fibre families—typically a synthetic filament skeleton (polyester/nylon) and a cellulosic pile/weft (viscose or cotton). An acidic chemical paste is printed in a pattern; when heated, it burns away (dissolves) the cellulosic fibres, leaving a sheer, translucent motif against an opaque ground.
  • Flock Printing: Short microscopic rayon or nylon fibres (0.5–2 mm flock dust) are propelled vertically by an electrostatic charge onto adhesive-printed fabric, creating a raised, velvety suede-like pattern.
  • Khadi Printing (White/Gold Pigment): Printing opaque titanium-dioxide white or metallic gold/silver pigment paste onto dark-dyed fabrics so the motif stands out sharply without discharging the base dye.
  • Permanent Heat Pleating (Plissé): Thermoplastic polyester fabrics are folded inside paper moulds or mechanical blades and steamed/heated above their glass-transition temperature to lock in permanent accordion, sunburst, or crushed pleats.

Check 5% job-work GST rules (SAC 9988) in our textile HSN & GST finder, or calculate value-addition margins in the margin calculator.

About this quiz

Level
Intermediate
Questions
10 multiple choice
Good for
Saree & kurti manufacturers, process house technicians, boutique buyers, fashion designers, students
Last reviewed

Sources

Spotted a mistake? Tell us and we will check it.

WhatsApp Us