Industrial Garment Sewing Machines, Stitches & Seams Quiz: Lockstitch, Overlock & SPI

Why do knitted T-shirt hems use a flatlock machine instead of a lockstitch? What does SPI do to seam strength? Test your industrial garment sewing and production knowledge.

  • 10 questions
  • About 5 minutes
  • Intermediate
Question 1How does a standard "Single-Needle Lockstitch" machine (Stitch Class 301) form a stitch?
Question 2Why are knitted T-shirt side seams sewn on a "4-Thread Overlock" machine rather than a standard single-needle lockstitch machine?
Question 3What is a "5-Thread Safety Stitch" (Stitch Class 516) widely used for in readymade woven kurti and shirt factories?
Question 4Which specialized industrial sewing machine is used to sew the parallel twin-needle bottom hem and sleeve hem on knitted cotton T-shirts?
Question 5What does "SPI" stand for on a garment factory's quality specification sheet?
Question 6What happens if a factory sews a fine cotton shirt at too low an SPI (e.g., 5 SPI) versus too high an SPI (e.g., 22 SPI)?
Question 7Why must sewing operators use "Ballpoint Needles" (SES/SUK) when stitching knitted jersey T-shirts and Lycra leggings?
Question 8Which machine and seam type are used to construct the heavy, double-stitched interlocking inseam and yoke on denim jeans?
Question 9What is the purpose of a "Bartack" machine in jeans, trousers, and kurti manufacturing?
Question 10In sewing needle sizing (e.g., Singer Size 9/65 vs Size 18/110), which needle size is appropriate for lightweight sheer chiffon/georgette versus heavy denim?

Study notes

Inside the Garment Stitching Line: Machines, Stitches & Seams

A well-stitched kurti, shirt, or pair of jeans depends on matching the right industrial sewing machine, stitch class, needle point, and stitch density to the fabric's weight and stretch.

Key Industrial Sewing Machines & Stitch Classes (ASTM D6193)

  • Single-Needle Lockstitch (Stitch Class 300 / 301): Interlocks an upper needle thread with a lower bobbin thread. It forms a strong, non-stretch seam that looks identical on both sides—the workhorse for woven cotton kurtis, shirts, and trousers.
  • Overlock / Serger (Stitch Class 500): Trims the raw fabric edge with a blade and wraps loopers around the seam allowance to prevent fraying.
    • 3-Thread Overlock: Edge neatening (serging) on woven panels.
    • 4-Thread Overlock: Primary structural seam for knitted T-shirts and leggings because the looped structure stretches with the knit.
    • 5-Thread Safety Stitch: Combines a 2-thread chainstitch with a 3-thread overlock in one pass—standard for woven kurti and shirt side seams.
  • Flatlock / Coverstitch (Stitch Class 400 & 600): Creates a parallel twin-needle top stitch with a flexible looper web underneath—essential for T-shirt bottom hems and activewear seams.
  • Feed-off-the-Arm Machine: Uses a tubular cylindrical arm and folder to sew durable double-stitched flat-felled seams on denim jeans inseams and formal shirt side seams.

SPI & Needle Selection

  • SPI (Stitches Per Inch): Controls seam strength and appearance (e.g., 12–14 SPI for fine cotton kurtis/shirts; 7–8 SPI for heavy denim).
  • Ballpoint Needles (SES/SUK): Have a rounded tip that pushes knitted loops aside instead of slicing them, preventing needle holes (yarn cutting) in jersey knits.

Calculate CMT stitching costs and net garment margins with our kurti margin calculator.

About this quiz

Level
Intermediate
Questions
10 multiple choice
Good for
Garment factory owners, production managers, master tailors, quality inspectors, fashion technology students
Last reviewed

Sources

Spotted a mistake? Tell us and we will check it.

WhatsApp Us